Star-headlight-lantern FM6908 Plug-N-Play Flasher Mobules Manuel d'utilisateur télécharger pdf

PLIT476 REV A 11/6/12

MODEL FM6908

Chrysler Solid State 7-Pattern Isolated Headlight Flasher

Congratulations! You are now the proud owner of the most technically advanced true 100%

Solid State Selectable Pattern Headlight Flasher System in the market today. Add to it our

never ending commitment to quality, when properly installed this new Flasher System will

provide you with years of dependable trouble free service.

Operating Specifications:

•

Compatible with both 2 and 4 headlight systems with isolated high beam wires

•

10-16 VDC Input

•

Output: 9.5A per output

55 Watt Load on each output

•

High-Beam Override - Disables flasher when high-beams are activated

•

Less than 10mA standby current

Mounting:

The enclosed headlight ﬂasher has been designed to be water resistant. However, to ensure

years of trouble free operation of the ﬂasher system, it should be mounted in a location that is

protected from direct water spray and high temperatures.

Electrical Connections:

GREEN: Connect to reliable ground, preferably close to ground post of battery.

BLUE: Locate the wire that supplies power to the passenger side high beam. Cut the

wire and connect the ﬂasher’s blue wire to the cut wire end that goes back to the

high beam headlight.

ORANGE: Connect the ﬂasher’s orange wire to the cut wire end from the passenger side

that goes back to the vehicle’s high beam switch.

YELLOW: Locate the wire that supplies power to the driver side high beam. Cut the wire

and connect the ﬂasher’s yellow wire to the cut wire end that goes back to the

high beam headlight.

GREY: Connect the ﬂasher’s grey wire to the cut wire end from the driver side that goes

back to the vehicle’s high beam switch.

WHITE: Connect to a +10-16VDC power source capable of providing 15 Amps.

WARNING: DO NOT USE A CIRCUIT BREAKER, FUSIBLE LINK,

OR SLOW BLOW TYPE FUSE!!

RED: Connect to a powered switch through a user supplied 1 amp fuse.

BLACK: (OPTIONAL Connection): If an “Automatic Nighttime Flasher disable” is required

(check with state and municipal regulations) simply ‘T’ or tap this wire into the

parking / marker light wire. This feature will disable the ﬂasher whenever the

parking marker lights are turned ON.

Flash Pattern Selection:

To change the pattern, momentarily

touch and release the Red/Black

wire to ground. The pattern will

change each time Red/Black wire is

touched to ground

Final System Check:

1. Verify Headlight Flasher

properly ﬂashes

headlights when Flash

Enable switch is activated.

2. With the Headlight Flasher

ON, activate the High

beams and verify that the

flasher de-activates and

that both high beam

headlights turn ON

steady.

3. If “Automatic Nighttime Flasher

disable” is hooked up (Black

wire), test it by activating the

headlight flasher, then turning

ON the parking/marker lights.

Verify that the Flasher is

automatically disabled.

FOR DODGE DURANGO OR DAKOTA INSTALLATIONS

ONE YEAR LIMITED WARRANTY

Star Headlight & Lantern Co., Inc. warrants this flasher, under normal use, against factory defects in material and

workmanship for one year after the date of purchase. The owner will be responsible for returning to the Service Center any

defective item(s) with the transportation costs prepaid. The manufacturer will, without charge, repair or replace at its

option, products, or part(s), which its inspection determines to be defective. Repaired or replacement item(s) will be

returned to the purchaser with transportation costs prepaid from the service point. A copy of the purchaser's receipt must

be returned with the defective item(s) in order to qualify for the warranty coverage.

This warranty shall not apply to any flasher which has been altered, such that in the manufacturer's judgment, the

performance or reliability has been affected, or if any damage has resulted from abnormal use or service. This warranty

does not apply to defect or damage occurring as a result of disaster, accident, abuse, misuse, lightning, power surges, or

failure to follow instructions in any enclosed manuals. Any damage or defects occurring as a result of any unauthorized

service or repairs by unauthorized persons shall be excluded from this warranty.

There are no warranties expressed or implied (including any warranty of merchantability or fitness), which extend this

warranty period. The loss of use of the product, loss of time, inconvenience, commercial loss or consequential

damages, including costs of any labor, are not covered. The manufacturer reserves the right to change the design of

the product without assuming any obligation to modify any product previously manufactured.

This warranty gives you specific legal rights. You might also have additional rights which may vary from state to state.

Some states do not allow limitations on how long an implied warranty lasts. Some states do not allow the exclusion or

limitation of incidental or consequential damages. Therefore, the above limitation(s) or exclusion(s) may not apply to you.

This product requires the proper installation of the Night-Time Cutoff circuit.

This circuit is controlled by the black wire exiting the Flasher. The black wire

must be wired according to the installation drawing and instructions. Failure to

do so may result in head damage to the vehicle’s headlamp housings at the

owner’s expense. The Headlamp Flasher will ONLY operate when the

headlamps are switched to OFF position. Whenever the headlamps are

activated, the Flasher WILL NOT function. It is the responsibility of the installer

to make certain the vehicle operator is aware of this situation.

IMPORTANT

Flashing Headlight and Taillight Systems are intended for use on approved

vehicles ONLY. It is the responsibility of the user of these systems to insure

compliance to any Federal, State, or Municipal regulations that may apply.

Pattern Select

Touch & Release to Ground

+12 VDC

Good

Chassis

Ground

Driver Side Highbeam Wire

CUT

OPTIONAL: Connect to Parking

Light Wire for

Nighttime Cut Off

RED -

Connect to flasher On/Off Switch

Passenger Side Highbeam Wire

BLUE

ORANGE

FM6908

Headlight

Flasher

GREEN

YELLOW

GREY

Good

Chassis

Ground

BLACK -

CUT

Good

Chassis

Ground

High

Beam

High

Beam

MODEL FM6908 1

Résumé du contenu

Page 1 - MODEL FM6908

PLIT476 REV A 11/6/12 MODEL FM6908 Chrysler Solid State 7-Pattern Isolated Headlight Flasher Congratulations! You are now the proud owner of

Commentaires sur ces manuels

Pas de commentaire

Star-headlight-lantern FM6908 Plug-N-Play Flasher Mobules Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Star-headlight-lantern FM6908 Plug-N-Play Flasher Mobules. Star Headlight & Lantern FM6908 Plug-N-Play Flasher Mobules User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Star-headlight-lantern FM6908 Plug-N-Play Flasher Mobules